 |
 |
 |
 |
 |
 |
 |
 |
PA500 RANGE
The PA500 range consists of AC power generation units,
multifunction AC/arc welding & boost charging units, arc welding units
and air compressor power modules.
The range is made
up of:-
PA511 3.5Kva 110v AC only
PA512 3.0 Kva 230v AC only
PA511 WorkPlace 110volt AC, Arc welding and 12/24v boost charge
PA512 WorkPlace 230volt AC, Arc welding and 12/24v boost charge
PW511 PowerWeld 200amp welding booster module for above
PW510 PowerWeld stand alone arc welding system.
The benefits of this system are
" Continuously rated - generate power all day with no need to refuel
" Light weight - typically 83% lower than a welder/generator, increasing available payload
" Less space requirement - typically 98% less volume than a generator, freeing up load space
" Manufactured in the UK to ISO 9001-2008 quality standards
" Low engine revs (typically 1250 rpm) to reduce fuel consumption and clean exhaust emissions compliant up to Euro V
" No need to carry additional fuel types and eliminated fuel theft
" External cooling air, requires no filtration
" Fully 17th edition compliant with RCD and MCB. Meets HSE recommendation for AC output centre tapped to earth.
" Full
UK wide field service support and two year warranty with planned maintenance
programmes
