PA500 Range

This range of multifunction on board power generation systems are for users who require 110v power with the addition of an electric arc welding capability and boost charging facility, all incorporated into one light weight unit.

 

Typical applications are service vehicles for - off highway plant, lifting equipment, forestry equipment, heavy trucks & buses, refuse vehicles, snowploughs and many more.


Power Range 3.5kVA

 

The PA500 range consists of AC power generation units, multifunction AC/arc welding & boost charging units, arc welding units and air compressor power modules.

 

The range is made up of:

PA511 3.5Kva 110v AC only 
PA512 3.0 Kva 230v AC only
PA511 WorkPlace 110volt AC, Arc welding and 12/24v boost charge
PA512 WorkPlace 230volt AC, Arc welding and 12/24v boost charge
PW511 PowerWeld 200amp welding booster module for above
PW510 PowerWeld stand alone arc welding system.

 

The benefits of this system are:

Continuously rated - generate power all day with no need to refuel

 

Light weight - typically 83% lower than a welder/generator, increasing available payload

 

Less space requirement - typically 98% less volume than a generator, freeing up load space

 

Manufactured in the UK to ISO 9001-2008 quality standards

 

Low engine revs (typically 1250 rpm) to reduce fuel consumption and clean exhaust emissions compliant up to Euro V

 

No need to carry additional fuel types and eliminated fuel theft

 

External cooling air, requires no filtration

 

Fully 17th edition compliant with RCD and MCB. Meets HSE recommendation for AC output centre tapped to earth.

 

Full UK wide field service support and two year warranty with planned maintenance programmes

Vehicle Engine Driven Generators | AC Power Systems | On Board Power Systems 

© Copyright PowerAll Ltd 2011

PA500d